How much should gutters cost on a 1500 sq ft house?

By , Owner & Founder · 7 min read · Updated Nov 6, 2026

Short answer

Gutters on a 1500 sq ft house should cost $1,200 to $2,400 for a professionally installed aluminum system, according to Roof Installation (2026). This estimate covers roughly 130 to 170 linear feet of gutters and downspouts. Total pricing varies based on contractor rates, which average $75 per hour, as well as necessary tear-off services. Removing older gutter materials adds $1 to $4 per linear foot for labor plus $94 to $350 for debris disposal.

Source: Gutter Giant, https://guttergiant.net/gutter-guide/how-much-should-gutters-cost-on-a-1500-sq-ft-house

A worker on an extension ladder installs seamless aluminum gutters onto the fascia board of a ranch-style house.
To limit the effects of thermal expansion in gutters, 50 feet is the practical maximum gutter length to be served by a downspout: 50 ft. (15 m) is a practical maximum gutter length to be served by a…

Estimated Gutter Replacement Costs for a 1,500 Sq Ft House#

Installing aluminum gutters on a 1,500-square-foot home costs $1,200 to $2,400 (roof-installation.com) for professional installation, as Roof Installation reported in 2026. That investment typically covers 130 to 170 linear feet of gutter material and downspouts. Understanding these numbers helps you budget accurately before speaking with exterior contractors.

Planning for new gutters on a 1,500 square foot home often means measuring roughly 150 linear feet of total material, as Pressure Tech documented in 2026 (pressuretech-llc.com). Your roof perimeter and corner drops define the footage. A single-story ranch home with simple straight runs keeps footage near the lower end. A split-level or complex footprint with dormers and valleys demands extra drops and higher material volume.

  1. Initial roofline assessment
  2. Material selection
  3. Old gutter removal
  4. Eaves and fascia prep
  5. System installation

Linear foot estimates give you a baseline, but you must treat the gutters as part of a complete exterior system. Gutters mount directly along the eaves, protecting the trim, walls, and foundation from uncontrolled runoff. When evaluating contractor quotes, check that the total covers all required drops, elbows, end caps, and mounting hardware rather than just the gutter channels.

Material and Labor Pricing Breakdown per Linear Foot#

A worker guides a newly extruded white aluminum gutter from a roll-forming machine in the back of a work truck.

National installation pricing across various materials and widths ranges from $4 to $40 (angi.com) per linear foot, according to Angi data. Gutter installation professionals charge around $75 per hour for labor, an expense that accounts for 10% to 50% of the total project invoice. Selecting the right material balances upfront affordability against long-term maintenance.

Regional pricing variations also affect your overall bill. Data published by HomeBlue in 2025 indicates that gutter installation costs in Manchester, New Hampshire range from $5.00 to $10.90 (homeblue.com) per linear foot depending on the chosen material and profile width. Homeowners weighing their options can compare standard materials to see where project budgets go:

Material Option Material Cost per Linear Foot Installed Cost per Linear Foot Source
Vinyl Gutters Less than $1.00 (homeblue.com) $4.00 to $7.00 HomeBlue (2025)
Seamless Aluminum Gutters Base metal pricing $6.00 to $10.40 HomeBlue (2025) (homeblue.com)
All Materials Market Range Material dependent $4.00 to $40.00 Angi (angi.com)

Vinyl gutters present the lowest entry price, but labor drives the invoice. HomeBlue reported in 2025 that vinyl materials run less than $1 (homeblue.com) per linear foot, with total installed costs landing between $4.00 and $7.00 per foot because labor accounts for nearly the entire amount. Seamless aluminum offers an upgrade in durability. In the same 2025 HomeBlue data set, seamless aluminum gutter installation costs between $6.00 and $10.40 per linear foot, excluding leaf protection.

Choosing a heavier aluminum gauge provides better resistance to wind loads and ladders. While DIY vinyl sections may seem tempting, seamless aluminum formed on-site eliminates seam leaks across long exterior spans.

Existing Gutter Removal and Disposal Fees#

Removing old, failing gutters involves labor, transport, and recycling or tipping fees. Labor pricing shifts based on home height:

  • Single-story homes require $1 to $2 (dropcurb.com) per linear foot for gutter removal labor.
  • Two-story homes cost $2 to $4 per linear foot for removal crews.
  • Some contractors apply a flat premium of $100 to $200 for second-story ladder access.

Professional gutter removal labor costs $1 to $4 per linear foot, with disposal adding an extra $94 to $350. For an average home requiring 150 to 180 feet of gutter tear-off, Dropcurb reported in 2026 that labor runs $150 to $360 (dropcurb.com) and debris hauling costs $120 to $250, creating a total removal charge of $270 to $610. That range covers taking down old metal or vinyl runs and loading them into disposal trucks.

Downspout removal is handled simultaneously. Most installation professionals include downspout removal in their standard quotes, but Dropcurb noted that some contractors bill $5 to $10 separately per downspout (dropcurb.com). Always verify whether disposal and downspout charges are included in your quote line items before work starts.

Slope, Spacing, and Drainage Layout Considerations#

A gutter technician checking the drainage pitch of an aluminum seamless gutter with a torpedo level.

Proper drainage layout protects your siding and foundation from overflow. Seamless gutters installed on a standard 1,500- to 2,000-square-foot home require hidden hangers spaced every 16 to 24 inches along the roofline, according to Roof Installation (2026) (roof-installation.com). That same 2026 Roof Installation standard requires gutters to slope 1/4 to 1/2 inch per 10 feet toward the downspouts to keep water moving freely.

Calculate your minimum slope per run using this standard pitch formula:

Total Pitch Drop = (Gutter Run Length in Feet / 10) × Pitch Rate

For example, a 30-foot gutter run using a 1/4-inch slope drop calculates as:

(30 / 10) × 0.25 = 0.75 inches total drop

Downspout planning prevents gutters from backing up during storms. JCalculator lists a common rule of thumb requiring one downspout per 600 to 800 square feet of roof area (jcalculator.com). In addition, field conventions often place one downspout every 30 to 40 feet of gutter run, as Top Rated Gutters noted in 2026 (topratedgutters.com). Once water starts spilling over gutter edges during regular rainfall, that is the point to bring in seamless gutters help to redesign your downspout capacity.

Building codes establish safety requirements rather than specific gutter shapes. Top Rated Gutters highlighted that the International Residential Code (IRC) provision R903.4 requires roof drainage to discharge to an approved location without creating a hazard or nuisance, though it specifies no gutter width or downspout size (topratedgutters.com). Sheet metal technical standards from SMACNA set practical maximums: to limit the effects of thermal expansion in gutter metal, 50 feet is the practical maximum gutter length served by a single downspout (apps.smacna.org). Adding a downspout extension or splash block ensures discharged water flows safely past the foundation wall.

Fascia Board Repairs and System Replacement Scope#

Gutters mount directly to the fascia boards along your roofline, creating a unified barrier against weather. Guardian Gutter Guide reported in 2026 that most single-family homes require between 120 and 220 linear feet of gutters and fascia (guardiangutterguide.com). When water backs up under roof shingles, it can rot this supporting lumber before gutter replacement begins.

Missing drip edge flashing allows rainwater to run behind the gutter back wall and saturate the wood. Fastening new gutter brackets into damaged, soft wood leads to loose hangers and sagging runs. A standard linear footage calculation helps your installer estimate both gutters and the underlying fascia boards simultaneously.

Fascia damage increases the total replacement budget. One and Done Prep indicates that when a home requires extensive fascia repairs or wood rot remediation, total project estimates adjust upward by 15% to 30% (oneanddoneprep.com). Inspecting your fascia for softness, peeling paint, or mold before workers arrive prevents mid-job price surprises.

Costs for Gutter Guards and Routine Cleaning#

Adding leaf protection reduces debris buildup from nearby trees. Data published by HomeBlue in 2025 reveals that gutter guard installation in Manchester ranges from $3.30 to $8.90 (homeblue.com) per linear foot, with final pricing depending on whether you install vinyl screens, perforated aluminum, steel screens, or micro-mesh systems.

Routine cleaning remains important for homes surrounded by deciduous trees or pines. HomeBlue (2025) reported that professional gutter cleaning for a typical one- or two-story home in Manchester costs between $70 and $180 (homeblue.com). Cleanings remove roof grit and leaves that block downspout outlets.

To make an informed purchase for your 1,500-square-foot home this week:

  1. Measure your roofline ground perimeter to confirm your linear footage.
  2. Check your fascia boards and eaves for visible rot, peeling paint, or loose boards.
  3. Count the number of downspout drops required by your roof layout.
  4. Schedule a free estimate with an exterior specialist serving Manchester, Nashua, or Concord to get a clear, written proposal for your home.
Professional Aluminum Gutter Installation Cost by Home Size
Home Size (Sq Ft)Gutter Linear FootageAluminum System CostProfessional Install Total
1,000 sq ft (small)100 to 130 lf$600 to $1,300$800 to $1,700
1,500 sq ft (medium)130 to 170 lf$780 to $1,700$1,200 to $2,400
2,500 sq ft (large)175 to 240 lf$1,050 to $2,400$1,800 to $3,500
3,000+ sq ft (estate)200 to 300+ lf$1,200 to $3,000$2,500 to $5,000
Gutter Removal and Disposal Cost by Home Size
Home ClassificationEstimated Gutter LengthRemoval Labor CostDisposal FeeTotal Removal Cost
Small ranch (1,000 sq ft)100 to 120 ft$100 to $240$94 to $170$194 to $410
Average home (1,800 sq ft)150 to 180 ft$150 to $360$120 to $250$270 to $610

Gutter Replacement & Installation Cost Calculator

Estimate total installation costs for seamless gutters on a home based on linear footage, gutter material per foot (including labor), old gutter removal, and optional gutter guard protection.

Gutter & Downspout Installation: $1,800

Removal & Disposal Fee: $150

Gutter Guards Cost: $0

Estimated Total Project Cost: $1,950

Frequently Asked Questions

Cost of gutters for 1,000 sq ft house

Professional aluminum gutter installation on a 1,000-square-foot house (100 to 130 linear feet) costs $800 to $1,700 total, with the aluminum system itself running $600 to $1,300.

Cost of gutters for 2,000 square foot house

A standard 2,000-square-foot house typically requires 150 to 200 linear feet of gutters. Professional installation totals $1,500 to $2,800, with aluminum system materials accounting for the bulk of the expense.

How do you estimate gutters?

Walk your roofline and measure or pace each edge needing a gutter (at roughly 2.5 feet per step). Add the height of each corner from roof to ground for downspouts.

Related reading

Disclaimer

This content is general information about gutters and home-exterior work and is not a substitute for an on-site inspection. Contact Gutter Giant for advice specific to your home.

Sources